|
Home >
Products > Riding
Greens Mowers > E-Plex™ II |
|
 |
 |
 |
 |
 |
 |
E-PLEX™ II
- FlashAttach® - Allows for fast, tool-free removal and installation of reels.
- Individual Reel Control - Allows user to lift/lower and mow with any one reel or any combination of reels, minimizing wheel tracking.
- Electric Drive - Provides the quietest riding greens mower in the market; Environmentally friendly; No hydraulic fluid.
- Swing-Out Center Reel - Allows for easy access to center reel for maintenance.
- Floating, Steerable Cutting Heads - Allow cutting units to move independently of the tractor.
|
 |
 |
|
|
|
|
| Electric Drives |
| Traction Drive |
3.5 hp (2.6 kW) @ 2,300 rpm; 48-volt, shunt-wound DC, totally enclosed electric motor; solid-state controller with regenerative braking |
| Traction Drivetrain |
Electric motor directly coupled to a DANA ® 15.67:1 ratio,differential; closed-loop electronic traction system |
| Reel Drive |
0.5 hp (0.4 kW); 48-volt, direct-coupled, permanent-magnet electric motor; solid-state controller |
| Reel Lift |
48-volt, electric linear actuator; closed loop control with traction drive; individual reel lift control |
| Source |
Eight 6-volt batteries; recommended 244-amp |
| Power Steering |
Available with either manual steering or electric power steering. |
|
|
|
 |
|
|
|
| VEHICLE |
| Tires |
Three 20 x 10 x 10, 2-ply |
| Ground Pressure |
10 psi (0.7 kg/cm2) |
| |
| BRAKES |
| Service |
6 in. (152 mm) diameter disc brakes on each front wheel; mechanically foot-actuated |
| Parking |
Locking latch on brake pedal |
| |
| Frame |
Unitized tubular steel construction |
| |
| |
| SPEED |
| Mowing |
0 - 5 mph (0 - 8 km/h); adjustable |
| Transport |
0 - 7.5 mph (0 - 12.1 km/h) |
| Reverse |
0 - 3.8 mph (0 - 6 km/h) |
| Steering |
15 in. (281 mm) diameter steering wheel; steers rear wheel through cables; electric power steering optional |
| Operator Controls |
Foot-operated direction/speed pedal; reel lift/lower pedal with integrated on/off mow switch; brake pedal; mow/transport speed
rocker switch; individiual reel lift/lower switches; master mow switch; light switch; power switch |
| Gauges/Indicators |
Hour meter; charge indicator; on/off indicator |
| Seat |
High-back, contoured |
| |
| |
| DIMENSIONS |
| WEIGHT: Traction Unit with Batteries |
| Unit Only |
1,216 lbs. (552 kg) |
| With Cutting Units |
1,464 lbs. (644 kg) |
| |
| LENGTH |
| Catchers On |
102 in. (2.6 m) |
| Catchers Off |
93 in. (2.4 m) |
| |
| Height |
55 in. (1.4 m) |
| Wheelbase |
54 in. (1.4 m) |
| |
| WIDTH |
| Across Wheels |
51.6 in. (1.3 m) |
| With Mowers Down |
75 in. (1.9 m) |
| |
|
| NOTE: Specifications, while correct at time of printing, may change without notice. This product has been tested and complies with B71.4 -2004 ANSI voluntary safety specifications for commercial turf equipment and also complies with EU safety regulations. |
|
|
|
|
 |
|
|
| Number and Size |
Three 22 in. (0.56 m) reels; 5 in. (127 mm) diameter |
| Number of Blades |
7, 9 or 11 |
| Blade Material |
Hardened, high-manganese carbon steel |
| Cutting Frequency |
.048 in/MPH (.76 mm/KPH) with 11 blade reels |
| Overall Cutting Width |
| Three Reels |
62 in. (1.6 m) |
| Each Reel |
22 in. (0.56 m) |
| Height-of-Cut Range |
0.062 in. (1.6 mm) to 0.438 in. (11.1 mm) depending on turf conditions and bedknife installed |
| Height-of-Cut Adjustment |
Front rollers with micro-adjusters |
|
|
|
|
|
 |
|
| High Profile (standard on 7-blade reel) |
0.156" - 0.438" (4.0 mm - 11.1 mm) |
| Low Profile |
0.125" - 0.219" (3.2 mm - 5.6 mm) |
| Tournament
(standard on 9-blade reel) |
0.094" - 0.156" (2.4 mm - 4.0 mm) |
|
Super Tournament (standard on 11-blade reel) |
0.062" - 0.109" (1.6 mm - 2.8 mm) |
| Bedknife-to-Reel Adjustment |
Opposed screw-type |
| Bedknife Material |
Hardened carbon steel |
|
|
|
|
|
|
 |
- 2" Grooved Aluminum Front
Roller (3 Required), Greaseable or Sealed
- 2" Grooved Steel Front Roller
(3 Required), Greaseable or Sealed
- 2" Grooved Segmented Front
Roller (3 Required), Greaseable
- 2" Smooth Front Roller (3
Required) with Scraper, Greaseable or Sealed
- 2" Smooth Rear Roller Scraper (1 per Cutting Unit Required)
- Cutting Units, 22" Greens
(3 Required), 9-blade or 11-blade (Includes Smooth Rear Roller)
- Cutting Units, 22" Tees (3
Required), 7-blade (Includes Smooth Rear Roller)
- Grass Catcher (1 per Cutting Unit
Required)
- Motor Adapter Kit, Required to
Adapt Additional Heads to E-Plex (1 per Unit)
|
|
 |
|
|
