|
 |
 |
 |
 |
 |
 |
G-PLEX™ III
- One Touch Lift/Lower - Located behind the steering wheel and on the floor board, allows for reel control without removing hands from the steering wheel.
- Onboard Backlapping - Optional onboard backlapping (standard on
diesel model).
- Patented Cutting Unit Stabilizer - Ensures parallel engagement and
disengagement of the reels and the turf.
- Swing-Out Center Reel - Allows for easy access to center reel for
maintenance.
- Free-Floating Steerable Cutting Heads - Allows cutting units to move independently of the tractor.
|
 |
 |
|
|
|
|
| G-PLEX™ III (DIESEL) |
| Engine |
Kubota® D722 3-cylinder |
Horsepower
(@ 3,600 rpm) |
18.8 hp (14 kW) |
| Displacement |
43.88 cu. in. (719 cc) |
| Air Cleaner |
Dry type, Donaldson |
| Cooling |
Pressurized, sealed cooling system; coolant capacity: 1 gal. (3.8 L) |
| Lubrication |
Fully pressurized |
| Oil Filter |
Replaceable, spin-on type |
| Electrical System |
12-volt; 40-amp alternator |
| |
| |
| G-Plex™ III (GAS) |
| Engine |
Briggs & Stratton® Vanguard™ V-twin, 4-cycle, 2-cylinder, OHV |
Horsepower
(@ 3,600 rpm) |
18 hp (13.4 kW) |
| Displacement |
35 cu. in. (574 cc) |
| Air Cleaner |
Replaceable dual element |
| Cooling |
Air-cooled |
| Lubrication |
Fully pressurized |
| Oil Filter |
Replaceable, spin-on type |
| Electrical System |
12-volt; 16-amp alternator; key start |
|
|
|
 |
|
|
|
| VEHICLE |
| Tires |
20 x 10 x 10, 2-ply pneumatic, tubeless |
| Brakes |
Hydrostatic |
| Parking Brake |
6 in. caliper disc |
| |
| |
| SPEED |
| Mowing |
0 - 3.8 mph (0 - 6.1 km/h) |
| Transport |
0 - 7.5 mph (0 - 12 km/h) |
| Reverse |
0 - 2 mph (0 - 3 km/h) |
| |
| |
| DRIVE |
| Transmission |
Hydrostatic |
| Traction Drive |
Hydraulic motor on each drive wheel |
| Reel Drive |
Gear-type hydraulic motor; backlap control standard on diesel models |
| Reel Lift |
Hydraulic double-action cylinders; Flash-attach cutting units with parallel-link head leveling system |
| Steering |
Hydraulically actuated power steering , adjustable-height steering arm |
| Hydraulic System |
6.8 gal. (25.7 L) capacity; 25-micron, full-flow filtration; biodegradable fluid; oil cooler standard |
| Fuel Capacity |
8 gal. (31 L) |
| |
| |
| DIMENSIONS |
| WEIGHT: Traction Unit |
| Unit Only |
1,178 lbs. (535 kg) - Diesel |
| Unit Only |
1,052 lbs. (478 kg) - Gas |
| With Cutting Units |
1,388 lbs. (630 kg) - Diesel |
| With Cutting Units |
1,264 lbs. (574 kg) - Gas |
| |
| LENGTH |
| Catchers On |
98 in. (2.5 m) |
| Catchers Off |
82 in. (2.1 m) |
| |
| Height |
49.4 in. (1.3 m) |
| Wheelbase |
49.7 in. (1.3 m) |
| |
| WIDTH |
| Across Wheels |
58 in. (1.5 m) |
| With Mowers Down |
74.5 in. (1.9 m) |
| |
|
| NOTE: Specifications, while correct at time of printing, may change without notice. This product has been tested and complies with B71.4 -2004 ANSI voluntary safety specifications for commercial turf equipment and also complies with EU safety regulations. |
|
|
|
|
 |
|
|
| Number and Size |
Three 22 in. (0.56 m) reels; 5 in. (127 mm) diameter |
| Number of Blades |
7, 9, or 11 |
| Blade Material |
Hardened, high-manganese carbon steel |
| Cutting Frequency |
0.048 in./mph (0.76 mm/kph) with 11 blade reels |
| Overall Cutting Width |
62 in. (1.57 m) |
| Rollers |
Solid, grooved, or segmented |
| Height-of-Cut Range |
0.062 - 0.438 in. (1.6 - 11.1 mm), depending on turf conditions and bedknife installed |
|
|
|
|
|
 |
|
| Tournament Profile |
0.094" - 0.156" (2.4 mm - 4.0 mm) |
| Low Profile |
0.125" - 0.219" (3.2 mm - 5.6 mm) |
| High Profile |
0.156" - 0.438" (4.0 mm - 11.1 mm) |
| Bedknife Adjustment |
Opposed set screw adjustment |
|
|
|
|
|
|
 |
|
- Cutting Units, 22" Greens
(3 Required), 9-blade or 11-blade (Includes Smooth Rear Roller)
- Cutting Units, 22" Tees (3
Required), 7-blade (Includes Smooth Rear Roller)
- Cutting Units, Verticut, (3 Required), .75" Spacing
with Smooth Front and Rear Roller
- 2" Smooth Front Roller (3
Required) with Scraper, Sealed or Greaseable
- 2" Grooved Steel Front Roller
(3 Required), Sealed or Greaseable
- 2" Grooved Aluminum Front
Roller (3 Required), Sealed or Greaseable
- 2" Grooved Segmented Front
Roller (3 Required)
- 2" Smooth Rear Roller Scraper
(1 per Cutting Unit Required)
- Groomer Assembly (3 Required),
.25" or .50" Spacing with Grooved Front Roller
- Backlapping Kit, G-Plex III Gasoline
(Standard on G-Plex III Diesel Model)
- (Set of 3) Quick Roll Greens Roller,
90# Rollers and Hardware (No Hydraulic Motor Required). Requires
One Roller/Spiker Adapter Kit
- (Set of 3) Spiker Attachment with Frame Assembly, 2"
Spacing, 30 Blades, 3 Weights (No Hydraulic Motor Required).
Requires One Roller/Spiker Adapter Kit
- Roller/Spiker Adapter Kit
- Weight Set Kit (1 per Cutting Unit
Required)
- Motor Adapter Kit (3 Kits Standard
with Current G-Plex III) to Adapt Additionally Heads Only
(1 per Cutting Unit Required)
- Rear Roller Brush Assembly (3 Required)
- Grass Catcher, (1 per Cutting Unit Required)
|
|
 |
