|
Home >
Products > Walking Greens Mowers > E-Walk™ |
Only walking greens mower to offer unprecedented results through exclusive control features and unbeatable quality-of-cut.
|
 |
 |
 |
 |
 |
 |
E-Walk™ - limited availability
- Environmentally Friendly - No oil or hydraulic fluids to spill or leak.
- New InCommand™ Control System - Features new user-friendly D-handle with variable speed control and more functional operator presence controls.
- Electric Drive - Two 48 V DC brushless weather-sealed motors control mow speed and reel RPM independently, allowing for variable clip frequency.
- Quick-Change Battery - Offers the ability to swap batteries on the course, maximizing productivity.
- Adjustable Frequency of Clip (F.O.C.) - Reel speed stays constant even if walk speed decreases.
|
 |
 |
|
|
|
|
| Electrical Power |
| Voltage |
48-volt DC |
| Motors |
Two 48-volt, brushless DC with built-in, sealed-control electronics |
| Batteries |
Four 12-volt, sealed lead-acid, wired in series; removable battery pack in plastic case |
| Charger (standard) |
5-amp, 48-volt; dual-voltage 115/230-volt AC, 50/60 Hz |
| |
| |
| Traction and Reel Drive System |
| Traction Drive |
Independent motor to two synchronous belts to traction drum |
| Traction Reduction Ratio |
15.15:1 |
| Mowing Speed |
0 - 3.4 mph (1.21 - 5.47 km/h) |
| Rear Drive Drum |
Two machined, aluminum alloy; 7.745 in. (197 mm) O.D. x 10.97 in. (278 mm) L |
| Differential |
Full automotive-type; housed in traction drum |
| Transport Tires |
Two bi-directional, pneumatic, 11 in. x 4 in. (279.4 x 101.6 mm) |
| Brakes |
Band on each side of drum; handle-actuated |
| Reel Drive |
Independent motor (direct drive) |
| Operator Presence Control (OPC) |
Integral OPC design; controls reel and traction drive |
|
|
|
 |
|
|
|
| Weight |
Overall
|
230 lbs. (104.3 kg) (with battery pack)
on green with catcher and machined-aluminum
grooved roller |
Adjustable Front
Roller Weight |
35 - 45 lbs. (15.9 - 20.4 kg) (with aluminum
grooved roller) |
| |
| |
| Batteries (four required) |
| Type |
20 amp-hr. sealed lead-acid |
| Physical Dimensions |
7.13 in. L x 2.99 in. W x 6.57 in. H (181 x 76 x 167 mm) |
| Part Number |
4121377 |
| |
| |
| Options |
| Work Light |
48 volt headlight |
| Wheel Kit (Starting 1/04) |
62293 |
| |
|
NOTE: Specifications, while correct at time of printing, may change
without notice. This Product has been tested and complies with B71.4 -2004 ANSI voluntary safety specifications for commercial turf equipment and also complies with EU safety regulations. |
|
|
|
|
 |
|
|
| Type |
Reel |
| Number of Blades |
11 |
Reel Speed
(factory setting) |
2,200 rpm |
| Frequency of Cut |
Variable (see chart) |
| Ground Speed |
Cutting Frequency |
| 3.4 mph (5.47 km/h) |
0.148 in. (3.76 mm) |
| 3.2 mph (5.15 km/h) |
0.14 in. (3.56 mm) |
| 3 mph (4.83 km/h) |
0.131 in. (3.33 mm) |
| 2.8 mph (4.51 km/h) |
0.122 in. (3.1 mm) |
| 2.6 mph (4.18 km/h) |
0.113 in. (2.87 mm) |
| 2.4 mph (3.86 km/h) |
0.105 in. (2.67 mm) |
| 2.2 mph (3.54 km/h) |
0.096 in. (2.44 mm) |
| 2 mph (3.22 km/h) |
0.087 in. (2.21 mm) |
|
| |
| Width of Cut |
22 in. (557.5 mm) |
| Height-of-Cut Range |
0.062 - 0.438 in. (1.6 - 11.1 mm) |
| Reel Diameter |
5 in. (127 mm) |
| Blade Material |
Hardened, high-manganese carbon steel |
| Reel Bearing |
Spring-loaded Timken tapered roller |
|
|
|
|
|
 |
|
| Bedknive Material |
Hardened carbon steel |
| High Profile (optional) |
0.156" - 0.438" (4.0 mm - 11.1 mm) |
| Low Profile (optional) |
0.125" - 0.219" (3.2 mm - 5.6 mm) |
| Tournament (optional) |
0.094" - 0.156" (2.4 mm - 4.0 mm) |
Super Tournament
(standard) |
0.062" - 0.109" (1.6 mm - 2.8 mm) |
| Catcher |
Polyethylene |
|
|
 |
|
|
