| Type |
Kubota® V2403-M 4-cylinder, turbocharged, liquid-cooled diesel
Available in limited quantities: Kubota® V2203-M, 4-cylinder, liquid-cooled diesel
Kubota® V2403-M 4-cylinder, turbocharged, liquid-cooled diesel
Available in limited quantities: Kubota® V2203-M, 4-cylinder, liquid-cooled diesel
|
| Displacement |
148.5 cu. in.
Available in limited quantities: 134.1 cu. in.
2.4 L
Available in limited quantities: 2.2 L
|
| Rated Power |
55.9 hp @ 2600 rpm
Available in limited quantities: 44.6 hp @ 2600 rpm
41.7 kW @ 2600 rpm
Available in limited quantities: 33.3 kW @ 2600 rpm
|
| Peak Torque |
120.7 lbs-ft @ 1800 rpm
Available in limited quantities: 105.6 ft.-lbs. @ 1600 rpm
163.6 NM @ 1600 rpm
Available in limited quantities: 143.2 NM @ 1600 rpm
|
| Air Cleaner |
Dry type Cylcopac air cleaner with restriction indicator light
Dry type Cylcopac air cleaner with restriction indicator light
|
| Cooling System |
Pressurized, sealed cooling system; coolant capacity 6 qt.
Available in limited quantities: Pressurized, sealed cooling system; coolant capacity 8 qt.
Pressurised, sealed cooling system; coolant capacity 5.7 L
Available in limited quantities: Pressurised, sealed cooling system; coolant capacity 7.6 L
|
| Lubrication |
Fully pressurized with remote engine oil cooler
Fully pressurised with remote engine oil cooler
|
| Fuel Consumption |
2.40 gal./hr ISO std. test 3046, @ 90% output
9.08 L/hr ISO std. test 3046, @ 90% output
|
| Fuel Capacity |
20 gal.
75.7 L
|
| Oil Filter Type |
Full-flow, replaceable spin-on remote type
Full-flow, replaceable spin-on remote type
|
| Electrical System |
45 amp alternator with 12V 750 CCA battery, circuit breakers, fuses
45 amp alternator with 12V 750 CCA battery, circuit breakers, fuses
|
| Cutting Time Productivity |
10.4 acres per hour at 7.7 mph
4.20 ha/hr at 12.4 km/h
|
| Fuel Productivity |
4.33 acres/gal.
0.46 ha/L
|
| Run Time per Tank |
8.33 hours
8.33 hours
|
| Mowing |
0 - 7.8 mph
0 - 12.6 km/h
|
| Transport |
2WD: 0 - 14.9 mph
4WD: 0 - 7.8 mph
2WD: 0 - 24.0 km/h
4WD: 0 - 12.6 km/h
|
| Reverse |
2WD: 0 - 6 mph
4WD: Locked out
2WD: 0 - 9.6 km/h
4WD: Locked out
|
| Traction System |
Hydrostatic, closed-loop system; variable-displacement piston pump; fixed-displacement piston motor to front positraction differential axle with integral gear reduction; motors on rear wheel electro-hydraulically engage/disengage for selectable two or four-wheel drive
Hydrostatic, closed-loop system; variable-displacement piston pump; fixed-displacement piston motor to front positraction differential axle with integral gear reduction; motors on rear wheel electro-hydraulically engage/disengage for selectable two or four-wheel drive
|
| Deck Drive |
Hydraulic motors with integral bearings; self-lubricating
Hydraulic motors with integral bearings; self-lubricating
|
| Hydraulic System |
17 gal. reservoir; o-ring face seal fittings; charge and return filters; suction screen at tank; oil cooler; diagnostic test ports
64.3 L reservoir; o-ring face seal fittings; charge and return filters; suction screen at tank; oil cooler; diagnostic test ports
|
| Hydraulic Cooling |
Hydraulic oil cooler
Hydraulic oil cooler
|
| Front Tires |
26 x 12-12, tubeless, 6-ply rated
26 x 12-12, tubeless, 6-ply rated
|
| Rear Tires |
23 x 10.5-12, tubeless, 4-ply rated
23 x 10.5-12, tubeless, 4-ply rated
|
| Service Brakes |
Dynamic braking from transmission; mechanical disc brakes on front wheels
Dynamic braking from transmission; mechanical disc brakes on front wheels
|
| Parking Brake |
Foot operated disc brakes
Foot operated disc brakes
|
| Steering |
Tilt Wheel: Hydrostatic with rear wheel steering
Tilt Wheel: Hydrostatic with rear wheel steering
|
| Number and Size |
One 64 in. full-floating front deck;
Two 42 in. full-floating wing decks
One 1.62 m full-floating front deck;
Two 1.07 m full-floating wing decks
|
| Construction |
10 gauge steel with reinforcing plates, ribs, bumpers
10 gauge steel with reinforcing plates, ribs, bumpers
|
| Caster Wheels |
4 x 11 pneumatic tires
4 x 11 pneumatic tires
|
| Cutting Unit Lift |
Hand operated, individual lever controlled hydraulic lift system
Hand operated, individual lever controlled hydraulic lift system
|
| Weight Transfer |
Hydraulic weight transfer - adjustable at operator controls
Hydraulic weight transfer - adjustable at operator controls
|
| Blades |
Seven 23 in., Low Noise, Low Lift
Seven 58 cm, Low Noise, Low Lift
|
| Motor/Spindle |
Hydraulic motors with integral bearings; self-lubricating
Hydraulic motors with integral bearings; self-lubricating
|
| Height of cut |
1 - 5.5 in.
24.5 - 139.7 cm
|
| Overall Cutting Width |
134 in.
3.4 m
|
| Weight |
3970 lbs.
1801 kg
|
| Length |
144 in.
3.66 m
|
| Height |
ROPS Up: 84 in.
ROPS Down: 63.5 in.
ROPS Up: 2.13 m
ROPS Down: 1.61 m
|
| Wheelbase |
67.8 in.
1.72 m
|
| Width |
139 in.
3.53 m
|
| Transport Width |
93.5 in.
2.37 m
|
|
United Kingdom
